Share:
Performance Features:
Ordinary puncher can produce duct corner code with die,and it’s also able to punch and cut angle steel with relevant dies. J23-25T is to make 0.7-0.8mm thickness galvanized sheet, J23-40T is for 1.2mm thickness. If thickness is max 2mm, it will need J23-60T.
If you need to make other ventilation accessories, you can customize additional grinding tools such as: Air duct accessories iron support plate
Technical Parameters:
Ordinary puncher can produce duct corner code with die,and it’s also able to punch and cut angle steel with relevant dies. J23-25T is to make 0.7-0.8mm thickness galvanized sheet, J23-40T is for 1.2mm thickness. If thickness is max 2mm, it will need J23-60T.
If you need to make other ventilation accessories, you can customize additional grinding tools such as: Air duct accessories iron support plate
Technical Parameters:
| Model |
Pressure (kn) |
Dimension of die holder (mm) |
Slide stroke (mm) |
Time (/min) |
Power (kw) |
Dimension L*W*H (mm) |
|---|---|---|---|---|---|---|
| J23-25T | 250 | 40*60 | 70 | 60 | 2.2 | 1220*920*2060 |
| J23-40T | 400 | 50*70 | 100 | 50 | 3 | 1320*970*2380 |
Inquiry - Air Duct Punching Machine
