1
Share:
| Specifications | Details |
|---|---|
| Material Width (mm) | Galvanized Steel Plate 0.5-1.5 (Other thicknesses available upon request) |
| Material Thickness Range (mm) | 1000-1250 / 1220-1530 |
| Coil Weight (t) | 5-7 / Configurable as required |
| Inner Diameter (mm) | 508 |
| Outer Diameter (mm) | ≤1300 |
| Working Speed (m/min) | ≤15 |
| Length Tolerance (mm/m) | ±0.5 |
| Diagonal Tolerance (mm/m) | ±0.5 |
| Weight (t) | 4.5 |
| Power (kw) | 7 |
Basic Configuration:
1. Two electric feeding racks (two feeding trays)
2. A set of leveling and pressing device
3. Four sets of hydraulic square punching and corner cutting dies
4. A set of hydraulic shearing device
5. A set of control system and touch screen operation panel
Working Principle: coil material - leveling - bead pressing - square opening - sharp corner punching - shearing
Working Diagram:
Description: Working principle: roll material - leveling - bead pressing - square opening - sharp corner punching - folding - shearing - bending
1. Cutting materials to fixed length, can be used directly with plasma cutting machine
2. C/S bone cutting angle, can cut various cutting angles of "L", "U", and "mouth" shapes, and can be used in conjunction with "C bone and S cutting strips. b. TDF common plate method The various connection methods of the flange can be used to position the shear angle, which can be used with TDF common plate flange machines and folding machines. c. The shear angle can be used with angle iron flanges or zigzag flanges.
3. It can complete the TDF shearing angle and bend it with the insert flange, such as the production of "mouth" type air duct. It can be used in conjunction with the joint seaming machine and the insert flange to complete the complete air duct.
2. C/S bone cutting angle, can cut various cutting angles of "L", "U", and "mouth" shapes, and can be used in conjunction with "C bone and S cutting strips. b. TDF common plate method The various connection methods of the flange can be used to position the shear angle, which can be used with TDF common plate flange machines and folding machines. c. The shear angle can be used with angle iron flanges or zigzag flanges.
3. It can complete the TDF shearing angle and bend it with the insert flange, such as the production of "mouth" type air duct. It can be used in conjunction with the joint seaming machine and the insert flange to complete the complete air duct.
Inquiry - Auto Duct Production Line 3
